CO129-545-8 Annual medical report 1932 2-11-1933 - 16-5-1934 — Page 234

23

13. All premises in which the work of manufacturing aerated water is carried on shall have their floor surfaces on ground surfaces of non-absorbent material finished off smooth, and their walls rendered to a height of seven feet with cement mortar or other non-absorbent material or be otherwise constructed and maintained to the satis-

faction of the Council.

14. Every aerated water manufactory shall be adequately lighted and ventilated to the satisfaction of the Council, and the ground sur- faces shall be paved with a layer of not less than six inches of good lime-concrete or not less than three inches of cement concrete com- posed of one part of cement, three parts of sand and five parts of stone broken to pass through a one inch ring, and the surface thereof shall be rendered smooth and impervious with a layer of asphalt or cement-mortar of not less than half an inch in thickness or such other material of such nature and thickness as the Council may approve.

15. Every room or other part of every aerated water manu- factory in which the actual work of manufacturing aerated water is carried on shall have the interior surfaces of the walls and ceilings or roofs limewashed throughout during the months of January and July each year.

16. The Council shall have power to exempt any aerated water manufactory from all or any of the foregoing by-laws.

Objects and Reasons.

This is one of the series of Bills prepared to give effect to the recommendations of the Director of Medical and Sanitary Services.

It is intended to replace the food provisions of Ordinance No. 1 of 1903 and the by-laws made thereunder. The said Ordinance and by-laws are to be repealed by another Bill in the same series which will come into force simultaneously by

Proclamation of the Governor.

C. G. ALABASTER,

September, 1933.

Attorney General.

366